Anping Jiongcan Hardware Mesh Products Co., Ltd
 |
| Place of Origin: | Anping China |
| Brand Name: | Jiongcan |
| Certification: | ISO9001 |
| Model Number: | JC-RD-023 |
| Phot Dip Galvanized Steel Gratingroduct Name: | Hot Dip Galvanized Steel Grating | Surface Treatment: | Hot Dipped Galvanized |
|---|---|---|---|
| Technique: | Welded Mesh | Thickness: | 3-10mm |
| Package: | Pallet | Cross Bar Pitch: | 50mm 100mm |
| Secondary Or Not: | Non-secondary | After-sale Service: | Online Technical Support |
| Main Materials: | Carbon Steel, Aluminum Steel, Stainless Steel | Anchoring Devices: | Saddle Clips, Countersunk Lands, Weld Lugs |
| Highlight: | ODM Hot Dip Galvanized Steel Grating,OEM Hot Dip Galvanized Steel Grating,ODM Galvanized Steel Grating |
||
Hot Dip Galvanized Steel Grating Is a flat steel in accordance with a certain distance and cross bar arrangement, and welded into the middle with a square grid of iron and steel products, the surface of hot dip galvanized steel grid processing is called hot dip galvanized steel plate.
The steel grid is made of carbon steel. Hot dip galvanizing treatment on the surface can prevent oxidation. Usually, most hot dip galvanizing treatment is used.
Two, hot dip galvanized steel grid production standards:
China has YB/T4001.1-2007 standard, in addition, the United States, the United Kingdom, Australia and New Zealand have their own standards.
Three, hot dip galvanized steel grid production method:
According to the specifications given by the customer for processing, welding, cutting, and finally wrapping, if there is a lack of Angle to remove the Angle in the edge sealing.
Four, hot dip galvanized steel grid type:
According to the production process, it can be divided into pressure welding steel grid plate and pressure lock steel grid plate, and it can be divided into I type steel grid plate, tooth type steel grid plate and plane type steel grid plate according to the shape of bearing flat steel.
Five, hot dip galvanized steel grid fixing method:
Can choose welding and installation clip fixed two ways, the advantages of welding is permanent fixed, not loose, specific position in the steel grid at each corner of the first edge of the steel, the weld length is not less than 20mm, the height is not less than 3mm fillet welding.
The advantages of the installation clip is not to destroy the hot dip galvanized layer and convenient disassembly, each plate needs at least 4 sets of installation clip, the number of installation clip increases with the increase of the length of the plate, the safest method is not under the clip, directly the screw head welding on the steel beam, to ensure that the steel grid plate will not slip from the beam because of the installation frame loose.
Six, hot dip galvanized steel grid plate:
The center spacing of flat steel is distinguished according to series: Series 1 is 30mm, Series 2 is 40mm, Series 3 is 60mm, bar spacing: Series 1 is 50mm, Series 2 is 100mm.
Seven, hot dip galvanized steel plate characteristics:
The solid grid pressure welding structure makes it has the characteristics of high bearing capacity, please structure, easy to hoisting, beautiful appearance, durable, hot dip zinc surface treatment makes it has quite good anti-corrosion ability, beautiful surface gloss, ventilation, lighting, heat dissipation, explosion-proof, anti-skid performance is good, anti accumulation of dirt.
Hot Dip Galvanized Steel Grating Specifications
earn more about the main components of metal bar grating |
|
| Span: | Total span. |
| Width: | Panel width. |
| Bearing Bars: | Load carrying main element. |
| Bearing Bars Spacing: | Measure from center-to-center of the bearing bars in 1/16″ increments. Standard spacing for industrial flooring is 19/16″(1-3/16″) on center. Other popular spacings are 15/16″, 11/16″, 1/2″, and 7/16″ on center. |
| Bearing Bars Depth: | Ranges from 3/4″ to 7″ depending on anticipated loads. |
| Bearing Bars Thickness: | Ranges from 1/8″ to 1/2″ depending on anticipated loads. |
| Cross Bars: | Used to Secure the position of bearing bars. |
| Cross Bar Spacing: | Measured from center-to-center of cross bars in 1″ increments. Standard spacing is 4″ or 2″ on center. |
Hot Dip Galvanized Steel Grating Application
Galvanized steel grates are suitable for alloys, building materials, power stations, boilers.Shipbuilding.Petrochemical, chemical and general industrial plants, municipal construction and other industries, with ventilation, light, anti-skid, strong bearing capacity, beautiful and durable, easy to clean, easy installation and other advantages.New bridge steel plate has been widely used in all walks of life at home and abroad.
Hot Dip Galvanized Steel Grating Advantages
Hot dip galvanized steel grid cover plate has ventilation, lighting, heat dissipation, anti-slip, explosion-proof and other properties.Its surface can be punched tooth (tooth shape hot dip galvanized steel grid cover plate) to increase the anti-skid performance.Flat steel can also be made of type I and flat steel.
Hot Dip Galvanized Steel Grating Process:
Steel plate process with manual welding process and welding machine process, surface treatment of hot dip galvanizing and painting, the composition of ordinary steel plate is made of flat steel and twist steel welded together, is composed of flat steel welded with special specifications, steel grid plate can be divided into common flat steel and sawtooth toothed plates, serrated flat non-slip effect is more outstanding.
The connection mode of steel grid plate is fixed and installed with buckle connector, which is composed of three parts.
Hot-dip galvanized steel grid plate can be installed in two ways: welding and clamping.The advantages of welding are permanent fixation, not loosening, specific position in the first flat steel at each corner of the steel grid plate, the length of the weld is not less than 20mm, the height is not less than 3mm of fillet welding.The advantages of the mounting clip are that it does not destroy the hot dipping zinc layer and it is easy to disassemble. Each plate needs at least 4 sets of mounting clips. The number of mounting clips increases with the increase of the length of the plate.The safest method is to weld the screw head directly to the beam without clamping down, so that the steel grille plate will not slip from the beam due to the loosening of the clamping.
Pre-sale service:
After the customer orders, we will have professional technical personnel to contact with the customer, in order to meet the customer's technical inquiry and production schedule.
Contact Person: admin
Tel: 13833841616
Fax: 86-0318-7619900
