Rust Protection Welded Steel Grating 32x5mm Square Serrated Non Slip

Rust Protection Welded Steel Grating 32x5mm Square Serrated Non Slip

Rust Protection Square Serrated Non-Slip Grille Plate Welded Steel Grating

Welded Steel Grating Introduction:

Steel grid plate, also known as steel grid, steel grid plate, grid plate, etc., is made of flat steel in accordance with a certain distance and bar (new twisted square steel, square steel, round steel, flat steel, etc.) for cross arrangement, and welded into the middle with a square grid of steel products.Daily often used and see the steel grid plate is generally made of Q235 low carbon steel hot rolled flat steel in accordance with a certain distance and the square steel bar of the twisted cross welding together, and welded into the middle with a square grid, usually in the outside of the steel grid for hot dip galvanized treatment, to prevent corrosion.

Welded Steel Grating Specifications:

Material: Q235B slitting flat steel, Q195 twist steel

Commonly used flat steel specifications: 25*3mm, 25*5mm, 30*3mm, 30*4mm, 30*5mm, 40*3mm, 40*4mm, 40*5mm, 50*3mm, 50*4mm, 50*4mm, 50*5mm, 60*5mm, 65*5mm, 70*5mm, etc.All can be customized

Commonly used twist steel specifications: diameter 6mm, 8mm, 10mm.

Welded Steel Grating Application:

Anti-rust metal steel grid plate has been widely used in all walks of life at home and abroad, the products are widely used in petroleum, chemical, alloy, building materials, power stations, boilers, shipbuilding, and general industrial plants, municipal construction and other industries of the platform, walkway, stairs, gutters cover, fence, railing, drainage manhole cover, manufacturing and so on

Welded Steel Grating Advantages:

1. Beautiful appearance: simple lines.
Silver appearance, modern trend.
2. Drainage: The water leakage area reaches 83.3%, more than twice that of cast iron.
3. Hot dip galvanizing: strong rust resistance, maintenance and replacement free.
4. Anti-theft design: the cover and the frame are connected by hinge, which is anti-theft, safe and easy to open.
5. Save on investment: Big jump.
Under heavy load, it is cheaper than cast iron and saves the cost of crushing and replacement.
6 high strength: strength and toughness is much higher than cast iron, can be used in wharves, airports and other large span and heavy load environment.
7. More specifications: to meet different environment, load.
Span, size and shape required.

Welded Steel Grating Process:

The process design of steel grid plate is to arrange the material according to the geometrical information of the sheet according to the size of the original plate, and the ultimate goal is to make the material cutting plan take into account the maximum utilization rate of the material and higher production efficiency.
The principle of steel grid process collocation mainly has the following aspects:
1, all the full plate size or more than the full plate size of the steel grid are in accordance with the length of the priority collocation, collocation size as little as possible and unified, length range control in 5-7 meters.
2. A small number of narrow plates can be arranged in order of width from large to small or from small to large, and then can be combined together in parallel according to length.
3. When the width overflows, the raw material cross bar is used for edge welding, instead of welding another plate.
4, double rod welding machine each pressure welding 2 bars, can not appear odd circumstances.
5, between the board and the board to retain the sawing size, if not enough need to leave a cross bar.
6, for a set of drawings need to be strictly classified.
If multiple drawings are more than 200 square meters, they need to be matched together. If less than 200 square meters, it can be considered to match them with small size drawings.
7, for the special-shaped steel grid, need to consider decomposition and docking, in order to achieve the most economical material.
8, for flat steel spacing 60 mm plate can be used 30 mm spacing comb clip for raw material production.

Welded Steel Grating installation:

The connection mode of steel grid plate is fixed and installed with buckle connector, which is composed of three parts.
Hot Dip Galvanized Steel Grating Package delivery:
Delivery when will we have a professional inspectors to check the quality of the product is unqualified, such as qualified will paste the qualified product certificate, and then fixed by shipping packaging, packaging with the steel plate on the metal tray, and then fixed with metal packing tape, finally wrapped by plastic film packaging, general each pallet packing 1-2 tons of cargo, in order to convenient for unloading and storage after the arrival of the goods. The unqualified products will be recalled by our quality inspector.
 

 Pre-sale service:

After the customer orders, we will have professional technical personnel to contact with the customer, in order to meet the customer's technical inquiry and production schedule.
 

After-sales:

After the goods are shipped, we will have professional technical personnel to docking with customers, so that when the goods arrive, there will be unloading problems, storage and installation problems. Our technical personnel will reply online within 24 hours. If there is a problem, we will docking within 2 hours and help customers solve the problem within 5 hours.