Q235 Skid Proof Galvanised Driveway Grates Light Structure 32x5mm

Q235 Skid Proof Galvanised Driveway Grates Light Structure 32x5mm

Q235 Hot Dip Galvanized Steel Structure Skid Proof Steel Driveway Grates Grating

Steel Driveway Grates Grating Introduction

Steel grid plate is also called steel grid plate, grid plate, is made of flat steel in accordance with a certain distance and cross bar arrangement, and welded into a kind of steel products with a square grid in the middle, mainly used to do the ditch cover plate, steel structure platform plate, steel ladder step plate, etc.
The bar is generally made of twisted square steel.
Production method of steel grid plate: steel grid plate is made of load flat steel and horizontal bar according to a certain distance by adopting 200 tons of hydraulic resistance welding automation equipment welding into the original plate, after cutting, opening, edge packaging and other processes from customer requirements of the product.
Load flat steel spacing: the center distance between two adjacent load flat steel, commonly used 30,40 and 50 and other kinds.
Bar spacing: the center spacing of two adjacent bars is usually 50,76,80,100, etc., can be produced according to customer requirements, according to customer requirements of various types of steel grid plate.

Steel Driveway Grates Grating Specifications

Steel Driveway Grates Grating Application:

Widely used in petroleum chemical industry, tobacco industry, electricity, water, sewage disposal, port terminals, building decoration, shipbuilding, self-contained parking lot, municipal engineering, environmental sanitation engineering areas such as the platform, walkway, pier, trench cover, manhole covers, ladders, fences, stadium, exhibition center, large commercial, station, wharf, airport and other industrial and civil construction of condole top, etc.

Steel Driveway Grates Grating Advantages:

1: high strength, light structure
2: strong anti-corrosion ability, durable
3: beautiful appearance, bright surface
4: no dirt, no rain and snow, no water, self-cleaning, easy to maintain
5: ventilation, lighting, heat dissipation, anti-skid, explosion-proof good
6: easy to install his folding unloading
 

Production Process:

Pressure welding steel grid plate is made of load flat steel and cross bar according to a certain distance by adopting 200 tons of hydraulic resistance welding automation equipment welding into the original plate, after cutting, opening, wrapping and other processes and products customer requirements.
Load flat steel spacing: the center distance between two adjacent load flat steel, commonly used 30MM, 40MM and 60MM three.
Rod spacing: the center spacing of two adjacent bars is usually 50MM, 100MM, two kinds

Installation Method:

In order to prevent the risk of falling, the installation of the steel grid plate should be fixed by welding as far as possible.
The steel grid plate shall be installed in accordance with the steel structure plate. After installation, it shall not be moved laterally or separated from the supporting frame. The supporting length at both ends of the steel grid plate bearing the flat steel direction on the supporting frame shall not be less than 25 mm for each section.
Platform steel grille plates that require removable and detachable are secured by the mounting fixture of the steel grille plates.
Prevent any shift of the member;
The requirements of the buyer can be supplied by the manufacturer. In addition to the installation clip made of stainless steel material, the installation clip made of carbon steel is treated by hot dip galvanizing. It is suggested that the bolts used for the installation clip are treated by hot dip galvanizing.