Parking Lot Q195 Steel Driveway Grates Grating Serrated I Type

Parking Lot Q195 Steel Driveway Grates Grating Serrated I Type

Hot Dip Galvanized Grille Plate For Parking Lot Steel Driveway Grates Grating

Steel Driveway Grates Grating Introduction

The grid plate is an open type steel member which is composed of bearing flat steel and horizontal bar in accordance with a certain distance and is fixed by welding or pressing lock.
The bar is generally made of twisted square steel, circular steel or flat steel. The material is divided into carbon steel and stainless steel.
Grille plate is mainly used to make steel structure platform plate, trench cover plate, steel ladder step plate, building ceiling and so on.
Grille plate is generally made of carbon steel, the surface of hot dip galvanized, can play a role in preventing oxidation.
It can also be made of stainless steel.
Grille plate has ventilation, lighting, heat dissipation, anti-skid, explosion-proof and other properties.
The grid plate is made of flat steel in accordance with a certain distance and cross the bar, through the pressure welding machine or manual welding into a kind of steel products with a square grid in the middle, the grid plate is mainly used to do the ditch cover plate, steel structure platform plate, steel ladder step plate and so on.
The bar is generally made of twisted square steel.

Steel Driveway Grates Grating Specifications

Steel Driveway Grates Grating Application:

Grille plate is suitable for alloy, building materials, power station, boiler.
Shipbuilding.
Petrochemical, chemical and general industrial plants, municipal construction and other industries, with ventilation, light, anti-skid, strong bearing capacity, beautiful and durable, easy to clean, easy installation and other advantages.
Gratings have been widely used in all walks of life both at home and abroad, mainly used for industrial platform, staircase pedal, banister, channel floor, railway bridge service, high tower platform, the drain cover, manhole covers, road barrier, three-dimensional parking lot, organs, schools, factories, enterprises and institutions, the stadium fence, garden villa, also can be used as a residence outside the window, balcony guardrail,
Parapets, etc of highways and railways.

Steel Driveway Grates Grating Advantages:

The surface of hot-dip galvanizing steel grating is treated with special hot-dip galvanizing, and its chemical and physical properties are stable, and it is not easy to be corroded and oxidized by air and microorganisms.
It can obviously enhance the trench load force.
Prevent collapse.
The hot dip galvanized steel grates with flat steel spacing of 3 cm are of great impact resistance and have the characteristics of maximum span.
The longer its service life is, it is generally within the range of 40-50 years.
Hot-dip galvanized steel grating is a very good steel frame structure and weighing platform if no destructive factors are considered to be involved.

Production Process:

Pressure welding steel grid plate is made of load flat steel and cross bar according to a certain distance by adopting 200 tons of hydraulic resistance welding automation equipment welding into the original plate, after cutting, opening, wrapping and other processes and products customer requirements.
Load flat steel spacing: the center distance between two adjacent load flat steel, commonly used 30MM, 40MM and 60MM three.
Rod spacing: the center spacing of two adjacent bars is usually 50MM, 100MM, two kinds

Installation Method:

In order to prevent the risk of falling, the installation of the steel grid plate should be fixed by welding as far as possible.
The steel grid plate shall be installed in accordance with the steel structure plate. After installation, it shall not be moved laterally or separated from the supporting frame. The supporting length at both ends of the steel grid plate bearing the flat steel direction on the supporting frame shall not be less than 25 mm for each section.
Platform steel grille plates that require removable and detachable are secured by the mounting fixture of the steel grille plates.
Prevent any shift of the member;
The requirements of the buyer can be supplied by the manufacturer. In addition to the installation clip made of stainless steel material, the installation clip made of carbon steel is treated by hot dip galvanizing. It is suggested that the bolts used for the installation clip are treated by hot dip galvanizing.